Search
Search plants, projects, owners, and states
Search plants, projects, owners, and states
13.5 MW Distillate Oil operating in Shelby, OH
13.5 MW
Nameplate Capacity
5
Generators
units
Petroleum Liquids
Technology
1968
Operating Since
Coordinates
40.2792, -84.1910
County
Shelby, OH
Nearby Plants
Forward-looking, asset-specific exposure analytics combining climate hazards, generation variability, and counterparty risk into a single decision-grade view. Powered by InfraRisk.
See the full risk decomposition + scenarios for this asset.
Request a demo →| Field | EIA | GEM | Wikidata |
|---|---|---|---|
| Operator | Kimura Power LLC | Kimura Power | — |
| Owner(s) | Kimura Power LLC | Rockland Capital | — |
| Status | Operating | — | — |
Located in Shelby County, Ohio, the Sidney (OH) power plant has a total capacity of 13.5 MW across five generators. The plant primarily runs on Distillate Fuel Oil (DFO) using Petroleum Liquids technology. It began operating in 1968 and is owned by Rockland Capital, with Kimura Power LLC as the listed operator per EIA data. The plant operates within the PJM Interconnection, LLC balancing authority and the RFC NERC region.
The Sidney (OH) plant is ranked 10th out of 38 similar plants in Ohio and 264th nationally out of 886. The latest annual generation data shows an output of 91 MWh, resulting in a capacity factor of 0.1%. Financial data indicates an installed cost of $83.78 per kW, based on FERC filings.
Generated from EIA, GEM, and public data sources
ISO/RTO
PJM
Market
ISO/RTO Member
NERC Region
RFC
Balancing Authority
PJM Interconnection, LLC (PJM)
Grid Voltage
12.4 kV
Regulatory Status
NR — Non-Regulated
Entity Type
Independent Power Producer
Sector
IPP Non-CHP
11 MWh
Latest Month
91 MWh
Annual Generation
0.1%
Capacity Factor
Forward-looking generation outlook with probabilistic ranges across weather, demand, and policy scenarios. Powered by InfraSure's generation modeling stack.
See the full forecast + scenario decomposition for this asset.
Request a demo →CO₂ Intensity
1504 lb/MWh
Low-utilization plant — per-MWh rate is dominated by startup/standby emissions; not directly comparable to baseload averages.
NOx
29 lb/MWh
SO₂
3 lb/MWh
CH₄
0.061 lb/MWh
N₂O
0.012 lb/MWh
Capacity Factor
0.0%
Annual Net Gen
0 GWh
CO₂eq
1509 lb/MWh
Subregion
RFC West
Internal combustion · The Dayton Power and Light Company · Data from 2015–2017
$0/kW
Installed Cost
$-146/kW
Annual CapEx
$579.4/MWh
Operating Cost
Annual Capital & Operating Expenses
Per-Unit Cost Trends
Market Position
ISO/RTO Market
PJM
LMP Node
32418669
Pricing Hub
AEP-DAYTON HUB
Node Source
EIA-860 direct report
Last updated 2026-03-26
View all articlesNo Ask reports yet for this entity.
Ask about Sidney (OH)